Specification Sheet

LMX-1202G-SFP 12-Port Industrial Gigabit Managed Ethernet Switch, with 10*10/100/1000Tx and 2*100/1000 SFP Slots
LMX-1202G-SFP-T
12-Port Industrial Gigabit Managed Ethernet Switch, with 10*10/100/1000Tx and 2*100/1000 SFP Slots;
EOT: -40°~75°C
Optional Accessories
MDR-20-24 20W Industrial Slim Single Output DIN-Rail Power Supply – 24VDC / 1.00 Amp
MDR-40-48 40W Industrial Slim Single Output DIN-Rail Power Supply – 48VDC / 0.83 Amp
SFP-M-T 1 Gigabit Fiber SFP Transceiver, Multi-Mode 550M / LC / 850nm, -40°~85°C
SFP-S10-T 1 Gigabit Fiber SFP Transceiver, Single Mode 10KM / LC / 1310nm, -40°~85°C
DIN-RACK-2U DIN-Rail to 19” Rack Mount Adapter for all DIN-Rail Mountable Products, 2U Height
Technology
Standards
IEEE 802.3 10Tx Ethernet
IEEE 802.3u 100Tx Fast Ethernet IEEE
802.3ab 1000Tx Gigabit Ethernet IEEE 802.3z
Gigabit Fiber
IEEE 802.3x Flow Control for Full Duplex IEEE
802.3ad for Port Trunk with LACP IEEE 802.1d
STP (Spanning Tree Protocol)
IEEE 802.1w RSTP (Rapid Spanning Tree
Protocol) IEEE 802.1s MSTP (Multiple
Spanning Tree Protocol) ITU-T G.8032/Y.1344
ERPS (Ethernet Ring Protection Switch)
Protocol
IEEE 802.1Q for VLAN Tagging
IEEE 802.1x for Network Authentication IEEE
802.1p QoS/CoS Protocol for Traffic
Prioritization
Switch Properties
Switch Architecture
Back-Plane (Switching Fabric): 24.0Gbps
Protocol
IGMPv1/v2, SNMPv1/v2c/v3, TFTP, SNTP,
SMTP, RMON, HTTP, HTTPS, Telnet, Syslog,
DHCP Option 66/67/82, SSH/SSL,
Modbus/TCP, LLDP, IPv4/IPv6
Data Process
Store-and-Forward
Transfer Rate
14,880pps for 10Base-T Ethernet
148,800pps for 100Base-T Fast Ethernet
1,488,000pps for Gigabit Ethernet
Packet Buffer
4 Mbits
MAC Table
8K
Jumbo Frame
9.6K
Flow Control
IEEE 802.3x for full duplex mode, back
pressure for half duplex mode
VLAN Group
0 ~ 4094
IGMP Group
Up to 256 Groups
Port Interface
Ethernet Port
10*10/100/1000Tx auto negotiation speed,
Full/Half duplex mode, and auto MDI
connection
Fiber Port
2*100/1000 Dual Rate SFP Slots
Wavelength Dependent on Fiber type and Distance
RS232 Serial
Console
1*RS232 in RJ45 connector with console cable,
115.2bps,8,N,1
Configuration
Backup
1*USB 2.0
Protection
Overload Current
Present
Power Reverse
Polarity
Present (the unit will not be on, if power
reverse)
Network Cable
10Base-T: 2-pair UTP/STP Cat. 3, 4, 5
cable; 100Base-TX: 2-pair UTP/STP Cat.
5 cable. EIA/TIA- 568 100-ohm (100m)
1000BaseTX: UTP/STP Cat.5/5E cable;
EIA/TIA-568 100-ohm (100m)
Mechanical Characteristics
LED Indicator
Per Unit: Power 1 & 2 (Green), Fault
(Red)
Housing Metal, IP30 rated
Dimensions 54 x 142 x 99 mm
Weight
Unit: 2.5 Ibs
Shipping: 3.0 Ibs
Mounting
DIN-Rail; Wall-mount (optional)
Power Requirement
Input Voltage 12~48VDC Redundant Input
Power Connection 1 removable 6-contact terminal block
Power Consumption 15 Watts
Environmental Limits
Operating
Temperature
STD: -10° to 70°C
EOT: -40° to 75°C
Storage Temperature -40°~85°C
Ambient Relative
Humidity
5 to 95%, (Non-condensing)
Regulatory Approvals
EMI
FCC Class A
EMS
EN6100-4-2,3,4,5,6,8
EN6100-6-2,4
Free Fall
IEC60068-2-32
Shock
IEC60068-2-27
Vibration
IEC60068-2-6
Green
RoHS Compliant
Certifications
FCC, CE, UL 61010-1, 61010-2-201,
NEMA TS2
Warranty
5 Years
SPECIFICATIONS
ORDERING INFO