Specification Sheet

LMX-1002G-SFP Series

Features

10-Port Industrial Gigabit Managed

Ethernet Switch, with

8*10/100/1000Tx and 2*100/1000 SFP Slots

► Supports 8*10/100/1000Tx Gigabit Ethernet Ports and

2*100/1000 Dual Rate SFP Slots for Fiber Connection

► Network Redundancy: STP/RSTP/MSTP, and G.8032 ERPS

(Recovery Time <50ms)

► Supports IPv4/IPv6, and DHCP Option 66/67/82

► Supports Modbus/TCP Protocol for Device Management and

Monitoring

► Configuration: Web Console, Telnet, CLI Command

► IGMP v1/v2 for Multicast Traffic Filtering

► QoS (IEEE802.1p/1Q), CoS/ToS to Increase Determinism

► IEEE802.1Q VLAN for Easy Network Planning

► Enhanced Network Security with IEEE802.1X, SNMP

v1/v2c/v3, HTTPS, and SSH/SSL

► Auto Warning by Exception through E-mail, Relay Output

► Support RMON Function for Efficient Network Monitoring

► Support Port Mirroring for Online Diagnostic

► 5-Year Warranty

Antaira’s LMX-1002G-SFP series is a 10-port industrial gigabit managed Ethernet switch that is embedded with eight gigabit Ethernet

ports and two dual rate (100/1000) SFP slots for fiber connection. It supports Jumbo Frame up to 9.6K for huge Ethernet data packet

transmissions. It is a fully manageable Layer 2 Ethernet switch that is pre-loaded with a user-friendly web management console design.

It supports the ring network redundancy function using the market’s open standard ITU-T G.8032 ERPS (Ethernet Ring Protection

Switch) protocol that has a <50ms network recovery time. The advanced network filtering and security functions, such as, IGMP,

VLAN, QoS, SNMP, RMON, Modbus TCP, and 802.1X/HTTPS/SSH/SSL increase determinism and improve network management for

remote SCADA systems or control networks.

The LMX-1002G-SFP series is a compact, IP30 rated, and DIN-rail or wall mountable. There are also two wide operating temperature

models for either a standard temperature range (STD: -10°C to 70°C) or an extended temperature range (EOT: -40°C to 75°C). It also

provides high EFT and ESD protection for industrial networking applications, such as, power/utility, water wastewater, oil/gas/mining,

factory automation, security surveillance, ITS and any other outdoor or harsh environment.

INTRODUCTION

DIMENSIONS

PAGE 1
LMX-1002G-SFP Series 10-Port Industrial Gigabit Managed Ethernet Switch, with 8*10/100/1000Tx and 2*100/1000 SFP Slots Features ► Supports 8*10/100/1000Tx Gigabit Ethernet Ports and 2*100/1000 Dual Rate SFP Slots for Fiber Connection ► Network Redundancy: STP/RSTP/MSTP, and G.
PAGE 2
SPECIFICATIONS Technology Standards Protocol Protection IEEE 802.3 10Tx Ethernet IEEE 802.3u 100Tx Fast Ethernet IEEE 802.3ab 1000Tx Gigabit Ethernet IEEE 802.3z Gigabit Fiber IEEE 802.3x Flow Control for Full Duplex IEEE 802.3ad for Port Trunk with LACP IEEE 802.1d STP (Spanning Tree Protocol) IEEE 802.1w RSTP (Rapid Spanning Tree Protocol) IEEE 802.1s MSTP (Multiple Spanning Tree Protocol) ITU-T G.8032/Y.1344 ERPS (Ethernet Ring Protection Switch) Protocol IEEE 802.1Q for VLAN Tagging IEEE 802.