Application Guide

[87]
Software User's
Manual
–
Version 3.0
Next Header Value
Setting Description
Factory
Default
0~255
When Next Header Filter > Other is selected for the IPv6 next
header value, you can enter a specific value. The allowed range is 0
to 255. A frame that hits this ACE matches this IPv6 protocol value.
0
SIP Filter
Specify the source IPv6 filter for this ACE.
Setting Description
Factory
Default
Any No source IPv6 filter is specified.
Any
Specific
Source IPv6 filter is set to Network. Specify the source IPv6 address
and source IPv6 mask in the SIP Address fields that appear.
SIP Address
Setting Description
Factory
Default
IPv6 address
When SIP Filter > Specific is selected for the source IPv6 filter, you
can enter a specific SIPv6 address. The field only supported last 32
bits for IPv6 address.
::
SIP BitMask
Setting Description
Factory
Default
IPv6 address
When SIP Filter > Specific is selected for the source IPv6 filter,
you can enter a specific SIPv6 mask. The field only supports the
last 32 bits for IPv6 address.
0xFFFFFFFF
Hop Limit
Setting Description
Factory
Default
zero
IPv6 frames with a hop limit field greater than zero must not be able
to match this entry.
Any
non-zero
IPv6 frames with a hop limit field greater than zero must be able to
match this entry.
Any Any value is allowed.
ICMP Parameters
ICMP Type Filter
Setting Description
Factory
Default
Any No ICMP filter is specified.
Any
Specific
If you want to filter a specific ICMP filter with this ACE, you can
enter a specific ICMP value. A field for entering an ICMP value
appears.