Application Guide

[85]
Software User's
Manual
–
Version 3.0
IP Fragment
Specify the fragment offset settings for this ACE. This involves the settings for the More Fragments
(MF) bit and the Fragment Offset (FRAG OFFSET) field for an IPv4 frame.
Setting Description
Factory
Default
No
IPv4 frames where the MF bit is set or the FRAG OFFSET field is
greater than zero must not be able to match this entry.
Any
Yes
IPv4 frames where the MF bit is set or the FRAG OFFSET field is
greater than zero must be able to match this entry.
Any Any value is allowed.
IP Option
Specify the options flag setting for this ACE.
Setting Description
Factory
Default
No
IPv4 frames where the options flag is set must not be able to match
this entry.
Any
Yes
IPv4 frames where the options flag is set must be able to match this
entry.
Any Any value is allowed.
SIP Filter
Specify the source IP filter for this ACE.
Setting Description
Factory
Default
Any No source IP filter is specified.
Any
Host
Source IP filter is set to Host. Specify the source IP address in the
SIP Address field that appears.
Network
Source IP filter is set to Network. Specify the source IP address and
source IP mask in the SIP Address and SIP Mask fields that appear.
SIP Address
Setting Description
Factory
Default
IP address
When Host or Network is selected for the source IP filter, you can
enter a specific SIP address in dotted decimal notation.
Notice the invalid IP address configuration is acceptable too, i.e.
0.0.0.0. Normally, an ACE with an invalid IP address will explicitly
add deny action.
0.0.0.0
SIP Mask
Setting Description Factory Default
IP address
When Network is selected for the source IP filter, you can
enter a specific SIP mask in dotted decimal notation.
255.255.255.0
DIP Filter
Specify the destination IP filter for this ACE.