Application Guide

[81]
Software User's
Manual
–
Version 3.0
1~4095
When Specific is selected for the VLAN ID filter, you can enter a
specific VLAN ID number. The allowed range is 1 to 4095. A
frame that hits this ACE matches this VLAN ID value.
1
Tag Priority
Setting Description
Factory
Default
Any No tag priority is specified
Any
0~7, 0-1, 2-3, 4-
5, 6
-
7,
0
-
3, 4
-
7
Specify the tag priority for this ACE. A frame that hits this ACE
matches this tag priority.
ARP Parameters
The ARP parameters can be configured when Frame Type "ARP" is selected.
ARP/RARP
Setting Description
Factory
Default
Any No ARP/RARP OP flag is specified.
Any
ARP Frame must have ARP opcode set to ARP.
RARP Frame must have RARP opcode set to RARP.
Other Frame has unknown ARP/RARP Opcode flag.
Request/Reply
Setting Description
Factory
Default
Any No Request/Reply OP flag is specified.
Any Request Frame must have ARP Request or RARP Request OP flag set.
Reply Frame must have ARP Reply or RARP Reply OP flag.
Sender IP Filter
Setting Description
Factory
Default
Any No sender IP filter is specified.
Any
Host
Sender IP filter is set to Host. Specify the sender IP address in
the SIP Address field that appears.
Network
Sender IP filter is set to Network. Specify the sender IP address
and sender IP mask in the SIP Address and SIP Mask fields that
appear.
Sender IP Address
Setting Description
Factory
Default