Application Guide

[73]
Software User's
Manual
–
Version 3.0
Action
Setting Description
Factory
Default
Permit Forwarding is permitted.
Permit
Deny Forwarding is denied.
Rate Limiter ID
Setting Description
Factory
Default
Disabled Rate Limiter is disabled.
Disabled
1~16 Select which Rate Limiter to apply on this port.
Port Redirect
Setting Description
Factory
Default
Disabled Port Redirect is disabled.
Disabled
Port X Select which port frames are redirected on.
Mirror
Setting Description
Factory
Default
Disabled Frames received on the port are not mirrored.
Disabled
Enabled Frames received on the port are mirrored.
Logging
Specify the logging operation of this port. Notice that the logging message doesn’t include the 4 bytes
CRC.
Setting Description
Factory
Default
Disabled Frames received on the port are not logged.
Disabled
Enabled Frames received on the port are stored in the System Log.
NOTE: The logging feature only works when the packet length is less than 1518(without VLAN
tags) and the System Log memory size and logging rate is limited.
Shutdown
Setting Description
Factory
Default
Disabled Port shut down is disabled.
Disabled
Enabled If a frame is received on the port, the port will be disabled.
NOTE: The shutdown feature only works when the packet length is less than 1518(without VLAN
tags).