Application Guide
[66]
Software User's
Manual
–
Version 3.0
Max. Reauth. Count
The number of times the switch transmits an EAPOL Request Identity
frame without response before considering entering the Guest VLAN is
adjusted with this setting. The value can only be changed if the Guest
VLAN option is globally enabled.
Valid values are in the range [1:255].
Allow Guest VLAN if
EAPOL Seen
The switch remembers if an EAPOL frame has been received on the port
for the life-time of the port. Once the switch considers whether to enter
the Guest VLAN, it will first check if this option is enabled or disabled. If
disabled (unchecked; default), the switch will only enter the Guest VLAN if
an EAPOL frame has not been received on the port for the life-time of the
port. If enabled (checked), the switch will consider entering the Guest
VLAN even if an EAPOL frame has been received on the port for the life-
time of the port.
The value can only be changed if the Guest VLAN option is globally
enabled.
Port Configuration
The table has one row for each port on the switch and a number of columns
Port
The port number for which the configuration below applies.