Application Guide

[65]
Software User's
Manual
–
Version 3.0
The Hold Time can be set to a number between 10 and 1000000 seconds
RADIUS-Assigned
QoS Enabled
RADIUS-assigned QoS provides a means to centrally control the traffic
class to which traffic coming from a successfully authenticated supplicant
is assigned on the switch. The RADIUS server must be configured to
transmit special RADIUS attributes to take advantage of this feature (see
RADIUS-Assigned QoS Enabled below for a detailed description).
The RADIUS-Assigned QoS Enabled checkbox provides a quick way to
globally enable/disable RADIUS-server assigned QoS Class functionality.
When checked, the individual ports’ ditto setting determines whether
RADIUS-assigned QoS Class is enabled on that port. When unchecked,
RADIUS
-
server assigned QoS Class is disabled on all ports.
RADIUS-Assigned
VLAN Enabled
RADIUS-assigned VLAN provides a means to centrally control the VLAN
on which a successfully authenticated supplicant is placed on the switch.
Incoming traffic will be classified and switched on the RADIUS-assigned
VLAN. The RADIUS server must be configured to transmit special
RADIUS attributes to take advantage of this feature (see RADIUS-
Assigned VLAN Enabled below for a detailed description).
The "RADIUS-Assigned VLAN Enabled" checkbox provides a quick way
to globally enable/disable RADIUS-server assigned VLAN functionality.
When checked, the individual ports' ditto setting determines whether
RADIUS-assigned VLAN is enabled on that port. When unchecked,
RADIUS
-
server assigned VLAN is disabled on all ports.
Guest VLAN
Enabled
A Guest VLAN is a special VLAN - typically with limited network access -
on which 802.1X-unaware clients are placed after a network
administrator-defined timeout. The switch follows a set of rules for
entering and leaving the Guest VLAN as listed below.
The Guest VLAN Enabled checkbox provides a quick way to globally
enable/disable Guest VLAN functionality. When checked, the individual
ports’ ditto setting determines whether the port can be moved into Guest
VLAN. When unchecked, the ability to move to the Guest VLAN is
disabled on all ports.
Guest VLAN ID
This is the value that a port’s Port VLAN ID is set to if a port is moved into
the Guest VLAN. It is only changeable if the Guest VLAN option is
globally enabled.
Valid values are in the range [1:4095].