Application Guide

[57]
Software User's
Manual
–
Version 3.0
Configuration > Security > Switch > RMON > Alarm
RMON Alarm Configuration
Configure RMON Alarm table on this page. The entry index key is ID.
Add New Entry
Setting Description
Delete Check to delete the entry. It will be deleted during the next save.
ID Indicates the index of the entry. The range is from 1 to 65535.
Data Source
Indicates the port ID which wants to be monitored. If in stacking switch, the
value must add 1000000*(switch ID-1). For example, if the port is switch 3 port
5, the value is
3
000005.
Interval
Indicates the interval in seconds for sampling and comparing the rising and
falling threshold.
The rang
e is from 1 to 2^31
-
1.
Variable
Indicates the particular variable to be sampled, the possible variables are:
 InOctets: The total number of octets received on the interface, including
framing characters.
 InUcastPkts: The number of uni-cast packets delivered to a higher-
layer protocol.
 InNUcastPkts: The number of broad-cast and multi-cast packets
delivered to a higher-layer protocol.
 InDiscards: The number of inbound packets that are discarded even
the packets that are normal.
 InErrors: The number of inbound packets that contained errors
preventing them from being deliverable to a higher-layer protocol.
 InUnknownProtos: the number of the inbound packets that were
discarded because of the unknown or un-supported protocol.
 OutOctets: The number of octets transmitted out of the interface,
including framing characters.
 OutUcastPkts: The number of uni-cast packets that request to transmit.
 OutNUcastPkts: The number of broad-cast and multi-cast packets that
request to transmit.
 OutDiscards: The number of outbound packets that are discarded even
the packets that are normal.
 OutErrors: The number of outbound packets that could not be
transmitted because of errors.