Application Guide

[49]
Software User's
Manual
–
Version 3.0
Configuration > Security > Switch > SNMP > Communities
SNMPv3 Community Configuration
Configure SNMPv3 community table on this page. The entry index key is Community.
Add New Entry
Setting Description
Delete Check to delete the entry. It will be deleted during the next save.
Community
Indicates the community access string to permit access to SNMPv3 agent.
The allowed string length is 1 to 32, and the allowed content is ASCII
characters from 33 to 126. The community string will be treated as a security
name and map a SNMPv1 or SNMPv2c community string.
Source IP
Indicates the SNMP access source address. A particular range of source
addresses can be used to restrict source subnet when combined with source
mask.
Source Mask Indicates the SNMP access source address mask.