Application Guide

[48]
Software User's
Manual
–
Version 3.0
System
Enable/disable that the Interface group's traps.
Setting Description
Factory
Default
Warm Start Enable/disable Warm Start trap. Disabled
Cold Start Enable/disable Cold Start trap. Disabled
Interface
Indicates the Interface group's traps. Possible traps are: Indicates that the SNMP entity is permitted to
generate authentication failure traps.
Setting Description
Factory
Default
Link Up Enable/disable Link Up trap. Disabled
Link Down Enable/disable Link Down trap. Disabled
LLDP Enable/disable LLDP trap. Disabled
Authentication
Indicates the authentication group's traps.
Setting Description
Factory
Default
SNMP
Authentication Fail
Enable/disable SNMP trap authentication failure trap. Disabled
Switch
Indicates the switch group's traps.
Setting Description
Factory
Default
STP Enable/disable STP trap. Disabled
RMON Enable/disable RMON trap. Disabled