Application Guide

[46]
Software User's
Manual
–
Version 3.0
Trap Version
Setting Description
Factory
Default
SNMP v1 Set SNMP supported version 1.
SNMP v2c SNMP v2c Set SNMP supported version 2c.
SNMP v3 Set SNMP supported version 3.
Trap Community
Setting Description
Factory
Default
0 ~ 255
characters
Indicates the community access string when sending SNMP trap
packet. The allowed string length is 0 to 255, and the allowed
content is ASCII characters from 33 to 126.
Public
Trap Destination Address
Setting Description
Factory
Default
IP address
Indicates the SNMP trap destination address. It allows a valid IP
address in dotted decimal notation (‘x.y.z.w’). And it also allows a
valid hostname. A valid hostname is a string drawn from the
alphabet (A-Za-z), digits (0- 9), dot (.), and dash (-). Spaces are not
allowed, the first character must be an alpha character, and the
first and last characters must not be a dot or a dash. Indicates the
SNMP trap destination IPv6 address. IPv6 address is in 128-bit
records represented as eight fields of up to four hexadecimal digits
with a colon separating each field (:). For example,
fe80::215:c5ff:fe03:4dc7. The symbol :: is a special syntax that
can be used as a shorthand way of representing multiple 16-bit
groups of contiguous zeros; but it can appear only once. It can also
represent a legally valid IPv4 address. For example,
::192.1.2.34.
None
Trap Destination port
Setting Description
Factory
Default
1~65535
Indicates the SNMP trap destination port. SNMP Agent will send
SNMP message via this port, the port range is 1~65535.
162
Trap Inform Mode
Setting Description
Factory
Default
Enabled Enable SNMP trap inform mode operation.
Disabled
Disabled Disable SNMP trap inform mode operation.