Application Guide

[42]
Software User's
Manual
–
Version 3.0
Configuration > Security > Switch > SNMP > System
SNMP System Configuration
Mode
Setting Description
Factory
Default
Enabled Enable SNMP mode operation.
Enabled
Disabled Disable SNMP mode operation.
Version
Setting Description
Factory
Default
SNMP v1 Set SNMP supported version 1.
SNMP v2c SNMP v2c Set SNMP supported version 2c.
SNMP v3 Set SNMP supported version 3.
Read Community
Setting Description
Factory
Default
Max. 255
characters
The field is applicable only when SNMP version is SNMPv1 or
SNMPv2c. If SNMP version is SNMPv3, the community string will
be associated with SNMPv3 communities table. It provides more
flexibility to configure a security name than a SNMPv1 or
SNMPv2c community string. In addition to community string, a
particular range of source addresses can be used to restrict
source subnet.
public