Manualshelf

Application Guide

ManualsBrandsAntaira Technologies ManualsComputers & AccessoriesAntaira LMX-0800 Industrial-Grade 8-Port Managed Fast Ethernet Switch, DIN-Rail Mount, -10 to 70°C Operating Temperature, Redundant 12 to 48 VDC Power Input
51525354555657585960
[41]
Software User's
Manual
–
Version 3.0
Configuration > Security > Switch > Access Management
Access Management Configuration
Configure access management table on this page. The maximum number of entries is 16. If the
application's type matches any one of the access management entries, it will allow access to the
switch.
Mode
Indicates the access management mode operation.
Setting Description
Factory
Default
Enabled Enable access management mode operation.
Disabled
Disabled Disable access management mode operation.
Add New Entry
Setting Description
Delete Check to delete the entry. It will be deleted during the next save.
VLAN ID Indicates the VLAN ID for the access management entry.
Start IP address Indicates the start IP address for the access management entry.
End IP address Indicates the end IP address for the access management entry.
HTTP/HTTPS
Indicates that the host can access the switch from HTTP/HTTPS interface if
the host IP address matches the IP address range provided in the entry.
SNMP
Indicates that the host can access the switch from SNMP interface if the host
IP address matches the IP address range
provided in the entry.
TELNET/SSH
Indicates that the host can access the switch from TELNET/SSH interface if
the host IP address matches the IP address range provided in the entry.