Application Guide

[31]
Software User's
Manual
–
Version 3.0
Configuration > Security > Switch > Users
This page provides an overview of the current users. Currently the only way to login as another user
on the web server is to close and reopen the browser.
Users Configuration
Setting Description
Factory
Default
User Name The name identifying the user. None
Privilege
Level
0~15
The privilege level of the user. The allowed range is 0 to 15. If the
privilege level value is 15, it can access all groups, i.e. that is granted
the full control of the device. But other values need to refer to each
group privilege level. User’s privilege should be the same or greater
than the group privilege level to have the access to that group. By
default setting, most group’s privilege level 5 has the read-only access
and privilege level 10 has the read-write access. And the system
maintenance (software upload, factory defaults, etc.) requires user
privilege level 15. Generally, the privilege level 15 can be used for an
administrator account, privilege level 10 for a standard user account,
and privilege level 5 for a guest account.
0