Manualshelf

Application Guide

ManualsBrandsAntaira Technologies ManualsComputers & AccessoriesAntaira LMX-0800 Industrial-Grade 8-Port Managed Fast Ethernet Switch, DIN-Rail Mount, -10 to 70°C Operating Temperature, Redundant 12 to 48 VDC Power Input
31323334353637383940
[22]
Software User's
Manual
–
Version 3.0
Configuration > DHCP > Server > Mode
DHCP Server Mode Configuration
This page configures global mode and VLAN mode to enable/disable DHCP server per system and
per VLAN.
Global Mode
Setting Description
Factory
Default
Enabled Enable DHCP server per system.
Disabled
Disabled Disable DHCP server per system.
VLAN Mode
VLAN Range
Indicate the VLAN range in which DHCP server is enabled or disabled. The first VLAN ID must be
smaller than or equal to the second VLAN ID. However, if the VLAN range contains only 1 VLAN ID,
then you can just input it into either the first or second VLAN ID, or both. Otherwise, if you want to
disable an existing VLAN range, then you can follow the steps below.
1. Press Add VLAN Ranges button to add a new VLAN range.
2. Input the VLAN range that you want to disable.
3. Choose Mode to be Disabled.
4. Press Save button to apply the change.
Then, you will see the disabled VLAN range is removed from the DHCP Server mode configuration
page.
Mode
Setting Description
Factory
Default
Enabled Enable DHCP server per VLAN.
Enabled
Disabled Disable DHCP server per VLAN.