Application Guide

[15]
Software User's
Manual
–
Version 3.0
Configuration > System > Log
System Log Configuration
Server Mode
Indicates the server mode operation. When the mode operation is enabled, the syslog message will
send out to syslog server. The syslog protocol is based on UDP communication and received on UDP
port 514 and the syslog server will not send acknowledgments back to the sender since UDP is a
connectionless protocol and it does not provide acknowledgments. The syslog packet will always send
out even if the syslog server does not exist.
Setting Description
Factory
Default
Enabled Enable server mode operation.
Disabled
Disabled Disable server mode operation.
Server Address
Indicates the IPv4 host address of syslog server. If the switch is provided a DNS, a domain name can
be entered.
Syslog Level
Indicates what kind of message will send to syslog server.
Setting Description Factory Default
Error
Send the specific messages which severity code is less
than
or equal t
o
Error(3).
Informational
Warning
Send the specific messages which severity code is less
than
or equal t
o
Warning(4).
Notice
Send the specific messages which severity code is less
than
or equal t
o
Notice(5).
Informational
Send the specific messages which severity code is less
than
or equal t
o
Informational(6).