Application Guide

[12]
Software User's
Manual
–
Version 3.0
Configuration > System > NTP
NTP Configuration
Mode
Setting Description
Factory
Default
Enabled Enable NTP client mode operation.
Disabled
Disabled Disable NTP client mode operation.
Server
Setting Description
Factory
Default
IPv4 or IPv6
address of an
NTP server
IPv6 address is in 128-bit records represented as eight fields of
up to four hexadecimal digits with a colon separating each field
(:). For example, fe80::215:c5ff:fe03:4dc7. The symbol :: is a
special syntax that can be used as a shorthand way of
representing multiple 16-bit groups of contiguous zeros; but it can
appear only once. It can also represent a legally valid IPv4
address. For example, 192.1.2.34. In addition, it can also accept
a domain name address.
None