Application Guide

[11]
Software User's
Manual
–
Version 3.0
IP Routes
Click the Add Route button to add a new IP route. A maximum of 32 routes is supported.
Setting Description
Delete Select this option to delete an existing IP route.
Network
The destination IP network or host address of this route. Valid format is
dotted decimal notation or a valid IPv6 notation. A default route can use
the value
0.0.0.0
or IPv6
::
notation.
Mask Length
The destination IP network or host mask in number of bits (prefix
length). It defines how much of a network address that must match, in
order to qualify for this route. Valid values are between 0 and 32 bits
respectively 128 for IPv6 routes. Only a default route will have a mask
length of
0
(as
it will match anything).
Gateway
The IP address of the IP gateway. Valid format is dotted decimal
notation or a valid IPv6 notation. Gateway and Network must be of the
same type.
Next Hop VLAN
(Only for IPv6)
The VLAN ID (VID) of the specific IPv6 interface associated with the
gateway. The given VID ranges from 1 to 4095 and will be effective only
when the corresponding IPv6 interface is valid. If the IPv6 gateway
address is link- local, it must specify the next hop VLAN for the
gateway. If the IPv6 gateway address is not link-local, system ignores
the next hop VLAN for the gateway.