Manualshelf

Application Guide

ManualsBrandsAntaira Technologies ManualsComputers & AccessoriesAntaira LMX-0800 Industrial-Grade 8-Port Managed Fast Ethernet Switch, DIN-Rail Mount, -10 to 70°C Operating Temperature, Redundant 12 to 48 VDC Power Input
221222223224225226227228229230
[215]
Software User's
Manual
–
Version 3.0
Configuration > sFlow
This page allows for configuring sFlow. The configuration is divided into two parts: Configuration of the
sFlow receiver (a.k.a. sFlow collector) and configuration of per-port flow and counter samplers.
sFlow configuration is not persisted to non-volatile memory which means that a reboot will disable
sFlow sampling.
Agent Configuration
IP Address
Setting Description
Factory
Default
IP Address
The IP address used as Agent IP address in sFlow datagrams. It
serves as a unique key that will identify this agent over extended
periods of time.
Both IPv4 and IPv6 addresses are supported.
127.0.0.1
Receiver Configuration
Owner
Basically, sFlow can be configured in two ways: Through local management using the Web or CLI
interface, or through SNMP. This read-only field shows the owner of the current sFlow configuration
and assumes values as follows:
If sFlow is currently unconfigured/unclaimed, Owner contains none.
If sFlow is currently configured through Web or CLI, Owner contains Configured through local
management.
If sFlow is currently configured through SNMP, Owner contains a string identifying the sFlow
receiver.