Application Guide

[213]
Software User's
Manual
Version 3.0
Configuration > GVRP > Global config
GVRP Configuration
Enable GVRP
The GVRP feature is globally enabled by setting the check mark in the checkbox named Enable
GVRP and pressing the Save button.
Join-time
Setting Description
Factory
Default
1 ~ 20
Join-time is a value in the range of 1-20cs, i.e. in units of one
hundredth of a second.
20
Leave-time
Setting Description
Factory
Default
60 ~ 300
Leave-time is a value in the range of 60-300cs, i.e. in units of one
hundredth of a second.
60
LeaveAll-time
Setting Description
Factory
Default
1000 ~ 5000
LeaveAll-time is a value in the range of 1000-5000cs, i.e. in units of
one hundredth of a second.
The default is 1000cs.
1000
Max VLANs
Setting Description
Factory
Default
maximum
number of
VLANs
When GVRP is enabled, a maximum number of VLANs supported
by GVRP is specified. This number can only be changed when
GVRP is turned off.
20