Application Guide

[209]
Software User's
Manual
Version 3.0
Configuration > QoS > Storm Policing
Global Storm Policer Configuration
There is a unicast storm policer, multicast storm policer, and a broadcast storm policer.
These only affect flooded frames, i.e. frames with a (VLAN ID, DMAC) pair not present in the MAC
Address table.
Setting Description
Frame Type The frame type for which the configuration below applies.
Enable Enable or disable the global storm policer for the given frame type.
Rate
Controls the rate for the global storm policer. This value is restricted to 1-
1024000 when unit is fps (frames per second), and 1-1024 when the unit is kfps
(kilo-frames per second). The rate is internally rounded up to the nearest value
supported by the global storm policer.
Unit Controls the unit of measure for the global storm policer rate as fps or kfps.