Application Guide

[208]
Software User's
Manual
–
Version 3.0
 Sport: Source TCP/UDP port:(0-65535) or ‘Any’, specific or port range applicable for IP
protocol UDP/TCP.
 Dport: Destination TCP/UDP port:(0-65535) or ‘Any’, specific or port range applicable for
IP protocol UDP/TCP.
6. IPv6
 Protocol: IP protocol number: (0-255, ‘TCP’ or ‘UDP’) or ‘Any’.
 Source IP: 32 LS bits of IPv6 source address in value/mask format or ‘Any’. If a port is
configured to match on DMAC/DIP, this field is the Destination IP address.
 DSCP: Diffserv Code Point value (DSCP): It can be a specific value, range of values, or
‘Any’. DSCP values are in the range 0-63 including BE, CS1-CS7, EF or AF11-AF43.
 Sport: Source TCP/UDP port:(0-65535) or ‘Any’, specific or port range applicable for IP
protocol UDP/TCP.
 Dport: Destination TCP/UDP port:(0-65535) or ‘Any’, specific or port range applicable for
IP protocol UDP/TCP.
Action Parameters
Setting Description
CoS Class of Service: (0-7) or ‘Default’.
DP Drop Precedence Level: (0-1) or ‘Default’.
DSCP DS1CP: (0-63, BE, CS1-CS7, EF or AF11-AF43) or ‘Default’.
PCP PCP: (0-7) or ‘Default’. Note: PCP and DEI cannot be set individually.
DEI DEI: (0-1) or ‘Default’.
Policy ACL Policy number: (0-255) or ‘Default’ (empty field).