Manualshelf

Application Guide

ManualsBrandsAntaira Technologies ManualsComputers & AccessoriesAntaira LMX-0800 Industrial-Grade 8-Port Managed Fast Ethernet Switch, DIN-Rail Mount, -10 to 70°C Operating Temperature, Redundant 12 to 48 VDC Power Input
211212213214215216217218219220
[200]
Software User's
Manual
–
Version 3.0
Configuration > QoS > Port DSCP
QoS Port DSCP Configuration
Setting Description
Port
The Port column shows the list of ports for which you can configure DSCP
ingress and egress settings.
Ingress
Translate: To Enable the Ingress Translation click the checkbox.
Classify: Classification for a port has 4 different values.
1. Disable: No Ingress DSCP Classification.
2. DSCP=0: Classify if incoming (or translated if enabled) DSCP is 0.
3. Selected: Classify only selected DSCP for which classification is
enabled as specified in DSCP Translation window for the specific
DSCP.
4. All: Classify all DSCP.
Egress
Disable: No Egress rewrite.
Enable: Rewrite enabled without remapping.
Remap DP Unaware: DSCP from analyzer is remapped and frame is
remarked with remapped DSCP value. The remapped DSCP value is always
taken from the DSCP Translation > Egress Remap DP0 table.
Remap DP Aware: DSCP from analyzer is remapped and frame is remarked
with remapped DSCP value. Depending on the DP level of the frame, the
remapped DSCP value is either taken from the DSCP Translation > Egress
Remap DP0 table or from the DSCP Translation > Egress Remap DP1 table.