Application Guide

[196]
Software User's
Manual
–
Version 3.0
Configuration > QoS > Queue Policing
QoS Ingress Queue Policers
Setting Description
Port The port number for which the configuration below applies.
Enable Enable or disable the queue policer for this switch port.
Rate
Controls the rate for the queue policer. This value is restricted to 100-3276700
when unit is kbps, and 1-3276 when unit is Mbps. The rate is internally rounded
up to the nearest value supported by the queue policer. This field is only shown
if at least one of the queue policers
is
enabled.
Unit
Controls the unit of measure for the queue policer rate as kbps or Mbps. This
field is only shown if at least one of the queue policers are enabled.