Application Guide

[195]
Software User's
Manual
Version 3.0
Configuration > QoS > Port Policing
QoS Ingress Port Policers
Setting Description
Port The port number for which the configuration below applies.
Enable Enable or disable the port policer for this switch port.
Rate
Controls the rate for the port policer. This value is restricted to 100-3276700
when unit is kbps or fps, and 1-3276 when unit is Mbps or kfps (kilo-frames per
second). The rate is internally rounded up to the nearest value supported by the
port policer.
Unit Controls the unit of measure for the port policer rate as kbps, Mbps, fps or kfps.
Flow Control
If flow control is enabled and the port is in flow control mode, then pause frames
are sent instead of discarding frames.