Application Guide

[192]
Software User's
Manual
–
Version 3.0
Configuration > VCL > IP Subnet-based VLAN
IP Subnet-based VLAN Membership Configuration
The IP subnet to VLAN ID mappings can be configured here. This page allows adding, updating, and
deleting IP subnet to VLAN ID mapping entries and assigning them to different ports.
Setting Description
Delete
To delete a mapping, check this box and press save. The entry will be deleted in
the stack.
IP Address
Indicates the subnet's IP address (any of the subnet's host addresses can be
also provided here, the application will convert it automatically).
Mask Length Indicates the subnet's mask length.
VLAN ID
Indicates the VLAN ID the subnet will be mapped to. IP Subnet to VLAN ID is a
unique matching.
Port Members
A row of check boxes for each port is displayed for each IP subnet to VLAN ID
mapping entry. To include a port in a mapping, simply check the box. To remove
or exclude the port from the mapping, make sure the box is unchecked. By
default, no ports are members and all boxes are unchecked.
“Add New Entry” button
Click “Add New Entry” button to add a new IP subnet to VLAN ID mapping entry. An empty row is
added to the table, and the mapping can be configured as needed. Any IP address/mask can be
configured for the mapping. Legal values for the VLAN ID are 1 to 4095.