Manualshelf

Application Guide

ManualsBrandsAntaira Technologies ManualsComputers & AccessoriesAntaira LMX-0800 Industrial-Grade 8-Port Managed Fast Ethernet Switch, DIN-Rail Mount, -10 to 70°C Operating Temperature, Redundant 12 to 48 VDC Power Input
191192193194195196197198199200
[188]
Software User's
Manual
–
Version 3.0
Configuration > VCL > MAC-based VLAN
MAC-Based VLAN Membership Configuration
The MAC address to VLAN ID mappings can be configured here. This page allows adding and
deleting MAC-based VLAN Classification List entries and assigning the entries to different ports.
Setting Description
Delete
To delete a MAC to VLAN ID mapping entry, check this box and press
S
ave.
The entry will be deleted in the stack.
MAC Address Indicates the MAC address of the mapping.
VLAN ID Indicates the VLAN ID the above MAC will be mapped to.
Port Members
A row of check boxes for each port is displayed for each MAC to VLAN ID
mapping entry. To include a port in the mapping, check the box. To
remove or exclude the port from the mapping, make sure the box is
unchecked. By default, no ports are members, and all boxes are
unchecked.
“Add New Entry” button
Click “Add New Entry” button to add a new MAC to VLAN ID mapping entry. An empty row is added to
the table, and the mapping can be configured as needed. Any unicast MAC address can be used to
configure the mapping. No broadcast or multicast MAC addresses are allowed. Legal values for a
VLAN ID are 1 through 4095.