Application Guide

[180]
Software User's
Manual
–
Version 3.0
Configuration > VLANs
This page allows for controlling VLAN configuration on the switch.
The page is divided into a global section and a per-port configuration section.
****************************************************************************************************************
Management VLAN 1 cannot be used on Trunk Ports. Please create a new Management VLAN when
configuring Trunk Ports.
****************************************************************************************************************
Global VLAN Configuration
Setting Description
Allowed Access VLANs
This field shows the allowed Access VLANs, i.e. it only affects ports
configured as Access ports. Ports in other modes are members of the
VLANs specified in the Allowed VLANs field. By default, only VLAN 1
is enabled. It is HIGHLY recommended to change the default
management VLAN 1. More VLANs may be created by using a list
syntax where the individual elements are separated by commas.
Ranges are specified with a dash separating the lower and upper
bound.
The following example will create VLANs 1, 10, 11, 12, 13, 200, and
300:
1,10
-
13,200,300
. Spaces are allowed in between the delimiters.
Ethertype for Custom S-
ports
This field specifies the Ethertype/TPID (specified in hexadecimal)
used for Custom S-ports. The setting is in force for all ports whose
Port Type is set to S
-
Custom
-
Port.