Application Guide

[177]
Software User's
Manual
–
Version 3.0
Port 0 Block
Status
Block status for Port 0 (Both traffic and R-APS block status). R-APS channel
is never blocked on sub
-
rings without virtual channel.
Port 1 Block
Status
Block status for Port 1 (Both traffic and R-APS block status). R-APS channel
is never blocked on sub
-
rings without virtual channel.
FOP Alarm
Failure of Protocol Defect(FOP) status. If FOP is detected, red LED glows;
otherwise
green LED glows.
ERPS VLAN Configuration #
Setting Description
Delete
To delete a VLAN entry, check this box. The entry will be deleted during the
next
s
ave.
VLAN ID Indicates the ID of this particular VLAN.
Adding a New
VLAN
Click “Add New Entry” button to add a new VLAN ID. Legal values for a
VLAN ID are 1 through 4095.
The VLAN is enabled when you click on Save. A VLAN without any port
members will be deleted when you click Save.
The
“
Delete
”
button can be used to undo the addition of new VLANs.
Click “Instance Configuration” VLAN
config to setting ERPS VLAN ID number