Application Guide

[165]
Software User's
Manual
–
Version 3.0
Loss Measurement State
Setting Description
Peer MEP The Peer MEP ID that the following state relates to.
Tx The accumulated transmitted LM PDUs - since last 'clear'.
Rx The accumulated received LM PDUs - since last 'clear'.
Near End Loss
Count
The accumulated near end frame loss count - since last 'clear'.
Far End Loss
Count
The accumulated far end frame loss count - since last 'clear'.
Interval
Elapsed
The accumulated number of 'FLR Interval' elapsed - since last 'clear'.
Interval Near
End Loss Ratio
The near end frame loss ratio calculated based on the near end frame loss
count and far end frame transmitted - in the latest 'FLR Interval'. This is shown
in (Loss/Tx)*10000. Same as 1/100 Percent.
Interval Far
End Loss Ratio
The far end frame loss ratio calculated based on the far end frame loss count
and near end frame transmitted - in the latest 'FLR Interval'. This is shown in
(Loss/Tx)*10000. Same as 1/100 Percent.
Total Near End
Loss Ratio
The near end frame loss ratio calculated based on the near end frame loss
count and far end frame transmitted - since last 'clear'. This is shown in
(Loss/Tx)*10000. Same as 1/100
Percent.
Interval Far
End Loss Ratio
The far end frame loss ratio calculated based on the far end frame loss count
and near end frame transmitted - since last 'clear'. This is shown in
(Loss/Tx)*10000. Same as 1/100 Percent.
Clear
Set of this check and save will clear the accumulated counters and restart ratio
calculation.