Application Guide

[161]
Software User's
Manual
–
Version 3.0
Test Signal State
Setting Description
TX frame count The number of transmitted TST frames since last 'Clear'.
RX frame
count
The number of received TST frames since last 'Clear'.
RX rate
The current received TST frame bit rate in Kbps. This is calculated on a 1 s.
basis, starting when the first TST frame is received after 'Clear'. The frame size
used for this calculation is the first received after 'Clear'
.
Test time
The number of seconds passed since the first TST frame received after the last
'Clear'.
Clear
This will clear all Test Signal State. Transmission of TST frame will be
restarted. Calculation of 'Rx frame count', 'RX rate', and 'Test time' will be
started when receiving first TST frame.
Client Configuration
Only a Port MEP is able to be a server MEP with flow configuration. The Priority in the client flow is
always the highest priority configured in the EVC.
Setting Description
Domain The domain of the client layer flow.
Instance Client layer flow instance numbers.
Level
Client layer level - AIS and LCK PDU transmitted in this client layer flow will be
on this level.
AIS Prio
The priority to be used when transmitting AIS in each client flow. Priority
resulting in highest possible PCP can be selected.
LCK Prio
The priority to be used when transmitting LCK in each client flow. Priority
resulting in highest possible PCP can be selected.