Application Guide
[138]
Software User's
Manual
–
Version 3.0
Transmit TLVs
It is possible to select which LLDP-MED information that shall be transmitted to the neighbors. When
the checkbox is checked, the information is included in the frame transmitted to the neighbor.
Setting Description
Interface The interface name to which the configuration applies.
Capabilities
When checked, the switch's capabilities are included in LLDP-MED
information transmitted.
Policies
When checked, the configured policies for the interface are included in LLDP-
MED information transmitted.
Location
When checked, the configured location information for the switch is included
in LLDP
-
MED information transmitted.
PoE
When checked, the configured PoE (Power over Ethernet) information for the
interface is included in LLDP
-
MED information transmitted.
Coordinates Location
Setting Description
Latitude
Latitude should be normalized to within 0-90 degrees with a maximum of 4
digits. It is possible to specify the direction to either North of the equator or
South
of the equator.