Application Guide

[119]
Software User's
Manual
–
Version 3.0
Configuration > IPMC Profile > Profile Table
IPMC Profile Configurations
This page provides IPMC Profile related configurations.
The IPMC profile is used to deploy the access control on IP multicast streams. It is allowed to create
at maximum 64 Profiles with at maximum 128 corresponding rules for each.
Global Profile Mode
Enable/Disable the Global IPMC Profile.
IPMC Profile Table Setting
“Add New IPMC Profile” button
Click to add new IPMC profile. Specify the name and configure the new entry.
Setting Description
Delete Check to delete the entry. It will be deleted during the next save.
Profile Name
The name used for indexing the profile table. Each entry has the unique
name which is composed of at maximum 16 alphabetic and numeric
characters.
At least one alphabe
tic character
must be present.
Profile
Description
Additional description, which is composed of at maximum 64 alphabetic and
numeric characters, about the profile. No blank or space characters are
permitted as part of description. Use "_" or "-" to separate the description
sentence.
Rule
When the profile is created, click the edit button to enter the rule setting page
of the designated profile. Summary about the designated profile will be shown
by clicking the view button. You can manage or inspect the rules of the
designated profile by using the following buttons:
: List the rules associated with the designated profile.
: Adjust the rules associated with the designated profile.