Application Guide

[112]
Software User's
Manual
–
Version 3.0
Configuration > Spanning Tree > MSTI Mapping
MSTI Configuration
This page allows the user to inspect the current STP MSTI bridge instance priority configurations.
Configuration Identification
Setting Description
Configuration
Name
The name identifying the VLAN to MSTI mapping. Bridges must share the
name and revision (see below), as well as the VLAN-to-MSTI mapping
configuration in order to share spanning trees for MSTI's (Intra-region). The
name is at most 32 characters.
Configuration
Revision
The revision of the MSTI configuration named above. This must be an integer
between 0 and 65535.
MSTI Mapping
Setting Description
MSTI
The bridge instance. The CIST is not available for explicit mapping, as it will
receive the VLANs not
explicitly mapped.