Application Guide

[108]
Software User's
Manual
–
Version 3.0
Configuration > Loop Protection
Loop Protection Configuration
General Settings
Setting Description
Enable Loop
Protection
Controls whether loop protections are enabled (as a whole).
Transmission
Time
The interval between each loop protection PDU sent on each port. Valid
values are 1 to 10 seconds. Default value is 5 seconds.
Shutdown Time
The period (in seconds) for which a port will be kept disabled in the event of a
loop being detected (and the port action shuts down the port). Valid values
are 0 to 604800 seconds (7 days). A value of zero will keep a port disabled
(until next device restart).
Default value is 180 seconds.
Port Configuration
Setting Description
Port The switch port number of the port.