Application Guide

[100]
Software User's
Manual
–
Version 3.0
Configuration > Security > Network > ARP Inspection > Dynamic Table
Dynamic ARP Inspection Table
Entries in the Dynamic ARP Inspection Table are shown on this page. The Dynamic ARP Inspection
Table contains up to 256 entries, and is sorted first by port, then by VLAN ID, then by MAC address,
and then by IP address. All dynamic entries are learning from DHCP Snooping.
Each page shows up to 99 entries from the Dynamic ARP Inspection table, default being 20, selected
through the “entries per page” input field. When first visited, the web page will show the first 20 entries
from the beginning of the Dynamic ARP Inspection Table.
The “Start from port address”, “VLAN”, “MAC address”, and “IP address” input fields allow the user to
select the starting point in the Dynamic ARP Inspection Table.
ARP Inspection Table Columns
Item Description
Port Switch Port Number for which the entries are displayed.
VLAN ID VLAN-ID in which the ARP traffic is permitted.
MAC Address User MAC address of the entry.
IP Address User IP address of the entry.
Translate to
static
Select the checkbox to translate the entry to static entry.