Specification Sheet

LMX-0601G-SFP 6-Port Industrial Gigabit Managed Ethernet Switch with 5*10/100/1000Tx and 1*100/1000 SFP Slot
LMX-0601G-SFP-T 6-Port Industrial Gigabit Managed Ethernet Switch with 5*10/100/1000Tx and 1*100/1000 SFP Slot; EOT: -40° to 75°C
Optional Accessories
MDR-10-12 10W Industrial Din Rail Power Supply, 12VDC
MDR-20-24 20W Industrial Din Rail Power Supply, 24VDC
MDR-40-48 40W Industrial Din Rail Power Supply, 48VDC
MDR-60-48 60W Industrial Din Rail Power Supply, 48VDC
Technology
Standards
IEEE 802.3 10Tx Ethernet
IEEE 802.3u 100Tx Fast Ethernet
IEEE 802.3ab 1000BaseT
IEEE 802.3z 1000Base-X
IEEE 802.3x Flow Control for Full Duplex
IEEE 802.1d STP (Spanning Tree Protocol)
IEEE 802.1w RSTP (Rapid Spanning Tree
Protocol)
IEEE 802.1s MSTP (Multiple Spanning Tree
Protocol)
ITU-TG.8032 / Y.1344 ERPS (Ethernet Ring
Protection Switch)
IEEE 802.1q Virtual LANs (VLAN)
IEEE 802.1x Network Authentication
IEEE 802.1ad Stacked VLAN, Q-in-Q
IEEE 802.1p QoS/CoS Protocol for Traffic
Prioritization
Switch Properties
Protocol
CSMA/CD, IGMPv1/v2, SNMPv1/v2, TFTP,
SNTP, SMTP, RARP, Syslog
Configuration
Web Console, Telnet, CLI
Transfer Rate
14,880pps for 10Base-T Ethernet port
148,8800pps for 100Base-T Fast Ethernet port
1,488,000pps for Gigabit Ethernet Port
Packet Buffer
1 Mbits
MAC Table
8K
Jumbo Frame
9.6K
Flow Control
IEEE 802.3x for full duplex mode, back
pressure for half duplex mode
VLAN Group
0 ~ 4094
IGMP Group
Up to 256 Group
Port Interface
Ethernet Port
5*10/100/1000BaseTx auto negotiation speed,
Full/Half duplex mode, and auto MDI/MDI-X
connection
Fiber Port 1*100/1000 SFP Slot
Fiber Wavelength Refer to SFP Modules
RS232 Serial
Console
1*RS232 in RJ45 connector with console cable,
115.2Kbps, 8,N,1
Configuration
Backup
1*USB 2.0
Protection
Overload Current
Protection
Present
Power Reverse
Polarity
Present
CPU Watchdog Present
Network Cable
10Base-T: 2-pair UTP/STP Cat. 3, 4, 5
cable; 100Base-TX: 2-pair UTP/STP Cat.
5 cable. EIA/TIA-568 100-ohm (100m)
1000BaseTX: UTP/STP Cat.5/5E cable;
EIA/TIA-568 100-ohm (100m)
Mechanical Characteristics
LED Indicators
Per Unit: Power 1 & 2 (Green), Fault
(Red)
Housing Metal, IP30 rated
Dimension 46 x 142 x 99 mm
Weight
Unit: 1.5 Ibs
Shipping: 2.3 Ibs
Mounting DIN-Rail; Wall-mount (optional)
Power Requirement
Input Voltage 12~48VDC Redundant Input
Power Connection 1 removable 6-contact terminal block
Power Consumption 10 Watts
Environmental Limits
Operating
Temperature
STD: -10° to 70°C
EOT: -40° to 75°C
Storage Temperature -40°~85°C
Ambient Relative
Humidity
5 to 95%, (non-condensing)
Regulatory Approvals
EMI
FCC Class A
EMS
EN61000-4-2,3,4,5,6,8
EN61000-6-2,4
Free Fall
IEC60068-2-32
Shock
IEC60068-2-27
Vibration
IEC60068-2-6
Green
RoHS Compliant
Certifications
FCC, CE, UL 61010-1, UL 61010-2-201
Warranty
5 Years
SPECIFICATIONS
ORDERING INFO