Specification Sheet

LMX-0501G-SFP 5-Port Industrial Gigabit Managed Ethernet Switch with 4*10/100/1000Tx + 1*100/1000 SFP Slot
LMX-0501G-SFP-T 5-Port Industrial Gigabit Managed Ethernet Switch with 4*10/100/1000Tx + 1*100/1000 SFP Slot; EOT: -40° to 75°C
Optional Accessories
MDR-10-12 10W Industrial Din Rail Power Supply, 12VDC
MDR-20-24 20W Industrial Din Rail Power Supply, 24VDC
MDR-40-48 40W Industrial Din Rail Power Supply, 48VDC
MDR-60-48 60W Industrial Din Rail Power Supply, 48VDC
Technology
Standards
IEEE 802.3 10Tx Ethernet
IEEE 802.3u 100Tx Fast Ethernet
IEEE 802.3ab 1000BaseT
IEEE 802.3z Gigabit Fiber
IEEE 802.3x Flow Control for Full Duplex
IEEE 802.1d STP (Spanning Tree Protocol)
IEEE 802.1w RSTP (Rapid Spanning Tree
Protocol)
IEEE 802.1s MSTP (Multiple Spanning Tree
Protocol)
ITU-TG.8032 / Y.1344 ERPS (Ethernet Ring
Protection Switch)
IEEE 802.1q Virtual LANs (VLAN)
IEEE 802.1x Network Authentication
IEEE 802.1ad Stacked VLAN, Q-in-Q
IEEE 802.1p QoS/CoS Protocol for Traffic
Prioritization
Switch Properties
Protocol
CSMA/CD, IGMPv1/v2, SNMPv1/v2, TFTP,
SNTP, SMTP, RARP, Syslog
Configuration
Web Console, Telnet, CLI
Transfer Rate
14,880pps for 10Base-T Ethernet port
148,8800pps for 100Base-T Fast Ethernet port
1,488,000pps for Gigabit Ethernet Port
Packet Buffer
1 Mbits
MAC Table
8K
Jumbo Frame
9.6K
Flow Control
IEEE 802.3x for full duplex mode, back
pressure for half duplex mode
VLAN Group
0 ~ 4094
IGMP Group
Up to 256 Group
Port Interface
Ethernet Port
4*10/100/1000BaseTx auto negotiation speed,
Full/Half duplex mode, and auto MDI/MDI-X
connection
Fiber Port 1*100/1000 SFP Slot
Fiber Wavelength Refer to SFP Modules
RS232 Serial
Console
1*RS232 in RJ45 connector with console cable,
115.2Kbps, 8,N,1
Configuration
Backup
1*USB 2.0
Protection
Overload Current
Protection
Present
Power Reverse
Polarity
Present
CPU Watchdog Present
Network Cable
10Base-T: 2-pair UTP/STP Cat. 3, 4, 5
cable; 100Base-TX: 2-pair UTP/STP Cat.
5 cable. EIA/TIA-568 100-ohm (100m)
1000BaseTX: UTP/STP Cat.5/5E cable;
EIA/TIA-568 100-ohm (100m)
Mechanical Characteristics
LED Indicators
Per Unit: Power 1 & 2 (Green), Fault
(Red)
Housing Metal, IP30 rated
Dimension 46 x 142 x 99 mm
Weight
Unit: 1.5 Ibs
Shipping: 2.3 Ibs
Mounting DIN-Rail; Wall-mount (optional)
Power Requirement
Input Voltage 12~48VDC Redundant Input
Power Connection 1 removable 6-contact terminal block
Power Consumption 10 Watts
Environmental Limits
Operating
Temperature
STD: -10° to 70°C
EOT: -40° to 75°C
Storage Temperature -40°~85°C
Ambient Relative
Humidity
5 to 95%, (non-condensing)
Regulatory Approvals
EMI
FCC Class A
EMS
EN61000-4-2,3,4,5,6,8
EN61000-6-2,4
Free Fall
IEC60068-2-32
Shock
IEC60068-2-27
Vibration
IEC60068-2-6
Green
RoHS Compliant
Certifications
FCC, CE, UL 61010-1, UL 61010-2-201
Warranty
5 Years
SPECIFICATIONS
ORDERING INFO