Specification Sheet
LMX-0501G-SFP Series
Features
5-Port Industrial Gigabit Managed Ethernet Switch, with
4*10/100/1000Tx and 1*100/1000 SFP Slot, 12~48VDC
Power Input
► Supports 4*10/100/1000Tx Fast Ethernet Ports and
1*100/1000 SFP Slot
► Network Redundancy Support: RSTP/MSTP, and
G.8032 ERPS (Recovery Time <50ms)
► Configuration: Web Console, Telnet, CLI Command
► Supports IGMP v1/v2, up to 256 Groups
► Supports QoS (IEEE802.1p) and CoS/ToS
► Supports IEEE802.1Q VLAN, SNMP v1/v2c
► System Warning Setting for Automatic Warning
through E-Mail
► Redundant Power Input Design: 12~48VDC
► IP30 Rugged Metal Case Design
► DIN-Rail and Wall Mount Support
► Operating Temperature Range: STD: -10° to 70°C,
EOT: -40° to 75°C
► 5-Year Warranty
Antaira’s LMX-0501G-SFP series is a 5-port industrial gigabit managed Ethernet switch that is embedded with four
gigabit Ethernet ports and one dual rate (100/1000) SFP slots for fiber connection. This series is a fully manageable
industrial Ethernet switch pre-loaded with standard Layer 2 network management software and supports a user-friendly
web console interface for easy configuration.
LMX-0501G-SFP series is IP30 rated, DIN-rail mountable, and has two wide operating temperature models for either a
standard temperature range (STD: -10°C to 70°C) or an extended temperature range (EOT: -40°C to 75°C). It also
provides high EFT and ESD protection for any industrial networking application within factory automation, ITS,
power/utility, water wastewater, and any other outdoor or harsh environment.
INTRODUCTION
DIMENSIONS