User Manual

ENGLISH
ANTMIX Series | User manual
24 25
SERIES
User manual | ANTMIX Series
12 DFX DISPLAY
This display shows the numbers corresponding to selected
effects by the PROGRAM (PUSH) encoder.
Press this button to activate effects unit encoder.
13 PROGRAM
This 100 position selector allows you to choose the type
of effect.
Turn the knob until you reach the desired program, then
press the knob to activate the selected effect.
The rst 10 programs called ECHO reproduce the classic
echo effect with increasing delay in the subsequent variants,
ECHO + VERB algorithms emulate a combination of echo
and reverb, the impressive effect used in many musical
productions, the TREMOLO effects are mostly used on
stringed instruments, while PLATE, CHORUS, and VOCAL
programs offer a pleasant sound widening and are ideal to
strengthen vocals.
The ROTARY effects simulate leslie organ, while the SMALL
ROOM programs reproduce the reverberation of rooms
with similar dimensions to those of residential rooms,
alternating the simulation of reflective and absorbent walls.
The FLANGER + REV section represents a combination
of effects perfect for different instruments, in particular
keyboards, and nally the LARGE HALL effects package
simulate the reverberation of environments with large
volumes characterized by mostly reflecting, naked walls.
14 DFX TO AUX
This knob sets DFX signal output level for AUX section.
15 PEAK/MUTE
This LED is lit when the signal sent to DFX is too
high, and there's a risk to saturate the internal effect.
It's a good setting of the effect sends when the LED
flashes occasionally, only on signal peaks. When
the LED remains continuously lit, it is an indication
of saturation. In that case please cut the volume of
DFX send. Press the button to MUTE the selected
effect program.
16 PFL & LED
This button activates pre-fade listen of internal
effects unit. It works also if the channel is muted;
the led indicates the activation of the command.
17 DFX RETURN
This fader sets the signal level of the internal effects
unit to the main output.
Use it to increase or decrease the amount of
processed signal to be sent to the MAIN MIX.
18 STEREO RETURN - TO MAIN
This knob sets the signal level of external stereo
effects unit to the main output.
Use it to increase or decrease the amount of
processed signal to be sent to the MAIN MIX.
19 TO AUX
This knob sets the signal level of STEREO RETURN
for AUX send. Use, for example, to adjust the
playback level of the external device connected to
STEREO RETURN input.
20 AUX SEND
This knob sets the overall signal for AUX send.
12
13
14
18
19
20
17
15
16