User Manual

ENGLISH
ANTMIX Series | User manual
14 15
SERIES
User manual | ANTMIX Series
5 | TECHNICAL SPECIFICATIONS
ANTMIX 16FX USB ANTMIX 124FX USB
Mono microphone/line input 8, 6 with compressor 16, 8 with compressor
Stereo microphone/line input 2 2
Stereo line inputs 2 2
Power supply 100-240V AC 100-240V AC
Power absorption 50W max 70W max
Dimensions
(W x H x D)
515 x 460 x 85 mm
20.25” x 18.11” x 33.46”
735 x 460 x 85 mm
29” x 18.11” x 33.46”
Weight 7Kg - 15.43 lbs 9,7Kg - 21.39 lbs
Microphone input
Connector XLR-F balanced
Impedance 1.8 kΩ
Frequency response 20~20kHz +/-1dB
Distortion (THD + N) <0,03% @ +0dB, 22~22 kHz, A weighted
Gain 0~55dB
Max input +15dB (balanced)
Low-cut 75Hz 12dB/ott.
Signal-to-noise ratio <-100 dBr A weighted
Phantom powering +48V
Line input
Connector 6,35mm (1/4”) balanced - RCA unbalanced
Impedance 10 kΩ or higher
Frequency response 20~20kHz +/-1dB
Distortion (THD + N) <0,03% @ +0dB, 22~22 kHz, A weighted
Gain +15dB~-35dB
Signal-to-noise ratio <-100 dBr A weighted
Common features
Compressor
(for channel featuring compressor)
Gain: 0 ---> 9 dB | Threshold: 20 dB ---> 5 dB
Hum & noise < -80dB A weighted, full band-width 1 channel and MAIN @ 0dB, other channels @ idle
Crosstalk < -80dB A weighted, full band-width 1 channel and MAIN @ 0dB, other channels @ idle
EQ
Mono & mono/stereo channels
+/-15 dB @12 kHz
+/-15 dB @ 100Hz~8kHz
+/-15 dB @ 80Hz
Stereo channels
+/-15 dB @ 12kHz
+/-15 dB @ 3kHz
+/-15 dB @ 500Hz
+/-15 dB @ 80Hz
2-TRACK IN
Connector 2 x RCA unbalanced
Impedance 10 kΩ
Frequency response 20~20kHz +/-1dB
Distortion (THD + N) <0,03% @ +0dB, 22~22 kHz, A weighted
Gain OFF~+15dB
STEREO RETURN
Connector 4 x 6,35mm(1/4”) balanced
Impedance 10 kΩ
Frequency response 20~20kHz +/-1dB
Distortion (THD + N) <0,03% @ +0dB, 22~22 kHz, A weighted
Gain OFF~+15dB
DSP
A/D D/A converters 24 bit
Number of effects 100
Controlli
Preset rotative encoder
DFX MUTE footswitch pedal
DFX MUTE switch
2-digit display
MAIN MIX section
MAIN MIX outputs 2 x XLR e 2 x jack 6,35mm (1/4”) balanced
MAIN MIX max level +22 dBu XLR balanced (+16 dBu unbalanced)
MAIN MIX impedance 120 Ω
GR1-2 GR3-4 outputs jack 6,35mm (1/4”) balanced
GR1-2, GR3-4 max levels +22 dBu 6,35mm (1/4”) balanced (+16 dBu unbalanced)
GR1-2 GR3-4 impedance 120 Ω
Prese Headphones 1-2 2 x jack 6,35mm (1/4”) stereo unbalanced
Headphones impedances 30Ω
Control room outputs 2 x jack 6,35mm (1/4”) balanced
Control room ipmedance 120 Ω
2-TRACK OUT outputs 2 x RCA unbalanced
2-TRACK impedance 1 kΩ
EMI CLASSIFICATION
According to the standard EN55103 this equipment is designed and suitable to operate in E3 (or lower E2, E1) electromagnetic
environments.