Operation Manual

Fabrikant – Hersteller – Manufacturer – Fabrikant: ANSSEMS AANHANGWAGENS B.V. www.anssems.eu
Versie: GT-2
26
11. Mounting the protection sides
Your trailer can be equipped with protection sides.
The protection sides are being deliverd with all fixation material needed. Before mounting the protection sides you must determine the right place. This
is against the vertical strip below the sideboard and also you should be aware off an distance of max. 300 mm from the front of the wheel. You can use
the protection sides as an example for the holes you must bore. The diameter for the holes is 11 mm.
The chassis beam contains the holes for the fixing of the safety covers.
ATTENTION: the reflektor which becomes invisible after mounting the protection sides has to be moved. (see picture). You can also chose to fixe an
extra reflector at the protection side.
12. Mounting the extension sides
Your trailer can be equiped with extension sides. The hight is 35 cm. With the remountable tailgate the hight of the sideboard becomes 65 cm.