Operation Manual

Fabrikant – Hersteller – Manufacturer – Fabrikant: ANSSEMS AANHANGWAGENS B.V. www.anssems.eu
Versie: GT-2
19
9. Mounting the shock absorber (Braked version)
Your trailer can be equipped with shock absorbers. (only possible for the braked trailers)
From the first axle hole the distance between the holes must be drilled at ø11mm. Please follow the pictures for mounting the shock absorber and the
mounting plate.
ATTENTION: Bolt heads should always point in the direction of the tyre and the axle shock absorber will be installed on the "inner side" only
with the 750 kg types. Please check the previous pages
After installation, check that the tyres have sufficient play (min. 16 mm).
10. Mounting the hard top (opening at the side)
Your trailer can be equipped with a hard top with aluminium railing.
When you buy a hard top a fitting description is attached. With this description the hard top can be fitted on the trailer.
The opening side indicated in the manual is based on opening the hard top to pavement side. When you change the assembly / drilling images the
opening side at the other side can be chosen.
ATTENTION:
The hard top cover is equipped with a shock absorber. By the mechanicem the hard top cover must be pulled “over the zero point”. The pressure of the
shock absorber is determed by a “empty” hard cover. When there is a loading on the hard cover, the shock absorber can function less. (hard cover
remains open) The shock absorber in a closed condition gives also more closing power.