Operation Manual

Fabrikant – Hersteller – Manufacturer – Fabrikant: ANSSEMS AANHANGWAGENS B.V. www.anssems.eu
Versie: GT-2
14
5. Mounting the High Cover
When you buy a high cover a description is deliverd also. With this description you can mount the high cover.One dimension is shown. Different sizes
are possible.
Opgave van de meeverpakte onderdelen:
Opgave van de hoofdonderdelen:
6. Mounting the flatcover
Your trailer can be equipped with a flatcover. You can mount the flatcover on the following way. See drawings below. It is depending from the length
and the width of the trailer if there must be fixed extra straps at the sideboards or at the front- or tailgate of the trailer. To determine the precise spot for
the straps you first must fit the flatcover over the trailer. After boring the holes you can mount the flatcover with the rivets. See below.
Mounting the flatcover (old version)