Operation Manual

Fabrikant – Hersteller – Manufacturer – Fabrikant: ANSSEMS AANHANGWAGENS B.V. www.anssems.eu
Versie: AMT-1
9
2.7.2. Tipping the jockey wheel
You can tip the jockey wheel when you wish to make room for the vehicle. You do not need to uncouple the trailer for loading or unloading
the vehicle.
Tipping from vertical/up to horizontal/down
Turn the handle to the left (1). The position of the handle can be removed and so you can put it in the position which is the most conviened for you.
Turn the handle so far that the breast of the handle comes free from the base plate. The handle and jockey wheel together can be turned backwards
(90 degrees) (2) till the jockey wheel is in a horizontal position. Turn till the handle is tightened in the big hole. (3). Be aware that the handle is
sufficiently tightened. Now you can set the requered position.
ATTENTION: Check weather the handle is sufficiently fastend
Tipping from horizontal/down to vertical/up
Turn the handle to the left (5).
The position of the handle can be removed and so you can put it in the position which is the most conviened for you. Turn the handle so far that the
breast of the handle comes free from the base plate. The handle and jockey wheel together can be turned forewards (90 degrees) (6) till the jockey
wheel is in a vertical position. Turn till the handle is tightened in the big hole. (7). Be aware that the handle is sufficiently tightened. Now you can set the
requered position.
ATTENTION: Check weather the handle is sufficiently fastend