Operation Manual

Fabrikant – Hersteller – Manufacturer – Fabrikant: ANSSEMS AANHANGWAGENS B.V. www.anssems.eu
Versie: AMT-1
19
6.2 Wheel stop
Your trailer can be equipped with a wheel stop.
The wheel stop may be used to fix a vehicle in position. The use of the wheel stop does not require any modifications to the trailer.
If a particular type of vehicle is transported more often, one may determine the proper place for the vehicle in order to obtain an optimum coupling
pressure. Attention: In addition to placing wheel stops (or a set of two units), secure the vehicle being transported in place with a little extra
firmness.
Place the wheel stop originally supplied with its lock secured on one side in a hole in the side of the MSX multi-transporter. Then push in the other lock
and place the wheel stop flat on the floor with the locking pin in front of a hole. Release the lock and check whether the lock is fully out.
Attention:
The wheel stop should never be held without protective gloves.
7. Spare Parts
Spare parts are very important for the safety of the trailer. When you do not use original spare parts, we are not longer responsible for the product and
if other than the original spare parts are being used, then the warranty and product liability expires. Meaning that we as a manufacturer no longer
responsible for any errors occurring or the consequences. Consequential damages and injuries on public roads may not be underestimated, keep this
in mind when using spare parts!