Operation Manual

Fabrikant – Hersteller – Manufacturer – Fabrikant: ANSSEMS AANHANGWAGENS B.V. www.anssems.eu
Versie: AMT-1
18
The mounting plate at the side, the supports for shock absorbers (2 x – stitch version per axle) to the schwingarm and the shock absorbers has to be
mounted as below. (See pictures)
Detail
ATTENTION: Bolt heads should always point in the direction of the tyre. (See pictures)
After installation, check that the tyres have sufficient play (min. 16 mm).
6. Using accessoiries
6.1 Front-/Tailgate
Your trailer can be equipped with a front-or/and tailgate.
The standard trailer is equipped with holes at the front and the back of the trailer. These holes are made for (see pictures) locking the front-/tailgate.
The tailgate can be fitted or remouved using the zip fasteners with are mounted to the tailgate.