Operation Manual

Fabrikant – Hersteller – Manufacturer – Fabrikant: ANSSEMS AANHANGWAGENS B.V. www.anssems.eu
Versie: AMT-1
17
You can mount the support under the floor as follows: (4 holes (pattern of the "square" holes) to bore first, to mount after) :
5. Mounting the shock absorber
Your trailer can be equipped with shock absorbers.
AMT 1500-...
The mounting plate at the side, the supports for shock absorbers (2 x – stitch version per axle) to the schwingarm and the shock absorbers has to be
mounted as below. (See pictures)
AMT 2000-..., AMT 2500-... en AMT 3000-...
The mounting plate at the side, the supports for shock absorbers (2 x – stitch version per axle) to the schwingarm and the shock absorbers has to be
mounted as below. (See pictures) For the shock absorber supports the plastic caps has to be removed at the bottom from both schwingarms (See
below)
Detail