Operation Manual

ManualsBrandsAnsmann ManualsBicycle E-bikeeBIKe

INSTRUCTIONS FOR YOUR NEW eBIKE

BICYCLE MAINTENANCE

To keep your new ANSMANN bicycle safe and to keep its look up some regularly main-

tenance is necessary:

• Maintain your bicycle regularly to maintain its value. To avoid damage from corrosi-

on or other damage please take note of the following:

• Clean your bicycle with water and a soft towel or sponge (never clean dry!). Never

use a high-pressure cleaner to avoid damages at the bearings, and paintwork.

• Do not use aggressive cleaner additives.

• Repair damage of the paintwork immediately.

• Parts that start to show signs of corrosion should be treated with preservatives and

care products, especially in winter.

• The bicycle should be stored in a dry room with a constant temperature, especially

in winter.

ENVIRONMENTAL FRIENDLY DETERGENTS

There are several special cleaners available. ANSMANN AG recommends using biodegra-

dable cleaners that are kind to the environment.

TORQUE SPECIFICATIONS

Rear Derailleur

Mounting bolt 7.8-9.8 Nm

Cable fixing bolt 3.9-5.9 Nm

Pulley screws 2.9-3.9 Nm

Front Derailleur

Clamp 4.9-6.8 Nm

Cable fixing bolt 4.9-6.8 Nm

Rapidfire-lever Clamp mounting bolt 4.9-6.8 Nm

STI Clamp mounting bolt 4.9-6.8 Nm

Brake lever Clamp mounting bolt 4.9-6.8 Nm

Freewheel hub

Freewheel body 35-49 Nm

Cassette fixing nut 30-49 Nm

Crankset

Square type 35-45 Nm

Spline type 35-50 Nm

Chainring srews 7.8-10.7 Nm

BB-Catridge 50-70 Nm

Pedals 40 Nm

Stern

Mounting bolts M5 9.8-13.7 Nm

M6 5.6-7.8 Nm

Seatpost-seatclamp

M4 2.8-3.9 Nm

M5 5.6-7.8 Nm

M6 9.8-13.7 Nm

V-Brake

Frame mounting bolts 5-6.8 Nm

Cable fixing bolts 5.8-7.8 Nm

Brake pad bolts 5-6.8 Nm

Caliper Disc Brake

Magura 6 Nm

Shimano 6-8 Nm

Formula 9 Nm

Hayes 12 Nm

Disc mounting bolts

Magura 4 Nm

Shimano 2-4 Nm

Formula 6.2 Nm

Hayes 5 Nm